Basic Setup and Configuration of JGive

Where to find settings?

In order to configure JGive on your system, go to JGive component main page on the backend.
Click on 'Options' in the top right side as shown in the screenshot below.
Clicking on options will open a pop-up window showing tabs which are described in next sections

General -> Integration settings

Integrate with: Select community to integrate jGive with. For Joomla, CB, JomSocial, and Jomwall - user avatar, profile URLs and activity stream integration is supported.
Fetch User profile pic from: http://en.gravatar.com/ - If you set this to 'Yes' then user profile pic fetched from http://www.gravatar.com
Force users to complete profile before creating a campaign: If you set this to 'Yes' then enter (in the textareas shown)
'jGiveField=JoomlaField,*'
Where '*' indicates a required field for profile completion. Note that every mapping field is separated by a newline e.g.
first_name=name,*
city=city
Autofill jGive form fields from the selected community: When set to 'Yes', jGive will try to auto-fill form fields from corresponding user profile fields as defined in mapping field settings above.
Joomla fields mapping with jGive (In disabled textarea you will find available fields for mapping): This is needed for checking 'Profile competition' & for 'Auto filling form fields.
Where '*' indicates a required field for profile completion. Note that every mapping field is separated by a newline e.g.
first_name=name,*
city=city
Jomsocial fields mapping with jGive (In disabled textarea you will find available fields for mapping): This is needed for checking 'Profile competition & for 'Auto filling form fields.
Where '*' indicates a required field for profile completion. Note that every mapping field is separated by a newline e.g.
first_name=name,
city=city
Community Builder fields mapping with jGive (In disabled textarea you will find available fields for mapping): This is needed for checking 'Profile competition' & for 'Auto filling form fields.
Where '*' indicates a required field for profile completion. Note that every mapping field is separated by a newline e.g.
first_name=firstname,
paypal_email=email
EasySocial fields mapping with jGive(In disabled textarea you will find available fields for mapping): This is needed for checking 'Profile competition' & for 'Auto filling form fields.
Where '*' indicates a required field for profile completion. Note that every mapping field is separated by a newline e.g.
first_name=first,
city=city

Mapping fields for EasyProfile: This is needed for checking 'Profile competition' & for 'Auto filling form fields.
Where '*' indicates a required field for profile completion. Note that every mapping field is separated by a newline e.g.
first_name=firstname,
paypal_email=email

General -> Campaign creation settings

Select default country: Select default country to be used on 'Create campaign form' and 'payment form'.
Select type of campaign types are allowed to be created: Select type of campaign types are allowed to be created.
Turn on admin approval to publish or unpublished campaigns: When this is set to 'Yes', admin approval is needed to publish or unpublished a campaign.
Hide selected fields on create campaign view: If you set 'Yes' then user selected fields will be hide on create campaign page.
Select fields to hide on create campaign view: User selects the fields which he wants to hide on create campaign view.
Hide selected fields on donation page: If you set 'Yes' then user selected fields will be hidden on dothe nation page.
Select fields to hide on donation page: User selects the fields which he wants to hide on the donation page.
Select fields to hide on campaign details page: User selects the fields which he wants to hide on campaign details page.
Decide campaign duration in days instead of end date: If you set 'Yes' while creating campaign end date selection text box will be displayed to enter campaign period.

Media settings -> Image settings

Enable image gallery - Set 'Yes' to enable image gallery. If yes then the user will be able to upload multiple images for the campaign.
Maximum No. of images in image gallery- Set limit to maximum images allowed to upload for the campaign.
Maximum Image size (in KB) - Put Maximum image size here in KB
Small size campaign image width - Put Small size campaign image width in pixel
Small size campaign image height - Put Small size campaign image height in pixel
Medium size campaign image width - Put Medium size campaign image width in pixel
Medium size campaign image height - Put Medium size campaign image width in pixel
Large size campaign image width - Put Large size campaign image width in pixel
Large size campaign image height - Put Large size campaign image width in pixel

Media settings -> Video settings

Enable video gallery - If set 'Yes' It allowed campaign creator to upload video.
Allowed video file types (extensions & please add only extensions which Jwplayer support) - Enter the video file types(extensions) that campaign creator allowing to upload.
Maximum video file size (in MB) - Set limit to maximum video file size (in MB).
Maximum No. of videos allowed to be uploaded - Set limit to maximum videos allowed to upload for the campaign.

Media settings -> Video thumbnail settings

Payment Settings

Select payment gateway(s) - Select Payment Gateway(s) to be used.
Enter currency - Enter currency to be used for all transactions for e.g USD.
Currency symbol - Enter currency symbol for e.g. $.
Enter amount display format(currency symbol to display before or after amount) - You can set currency, currency symbol before or after amount for e.g. To display $ 100 use {CURRENCY_SYMBOL}{AMOUNT}.
Amount separator (available for donation amount only) - Enter amount separator for e.g ',', '.'
Send payments directly to campaign promoter without charging any commissions ( works only with Paypal payment gateway ) - Send payments directly to Campaign Promoter without charging any commissions ( Works only with Paypal Payment Gateway).
Commission fee (in percent) - Enter commission fee to be charged per transaction(in %). Commission set will be charged if only Send payments directly to campaign promoter without charging any commissions ( works only with Paypal payment gateway ) is set 'Yes'.
Fixed commission (flat) - Enter fixed commission to be charged per transaction. The fixed commission will be the charge if only Send payments directly to campaign promoter without charging any commissions ( works only with Paypal payment gateway ) is set 'Yes'.
VAT registration number for donor - Set 'Yes' to include VAT registration number in donor donation details form.
Enable guest donations - Allow guest users to donate without registering to your site
Enable recurring donation/investment - Set 'Yes' to allow recurring donation for a campaign (only for Paypal)
Enable quick donation - In full payment flow, donor/investor will need to fill full details. If you want to avoid this overhead then this option.

- Set commission for campaigns created by user group

These are optional settings. These settings let you charge different amount of commissions for the campaigns created by different Joomla-user-groups

Select user group to set commission % - Select user group to set commission % for campaign types donate/invest.
Commission % on donation campaigns - Commission % on donation campaigns for selected user group.
Commission % on investment campaigns - Commission % on investment campaigns for the selected user group.

Order id settings

Enter prefix for order id - Enter the prefix to be used for all orders (donations/investments). e.g. 'JGOID'.
Enter separator to use in order id - Enter the separator to be used in order id generation e.g. '-'.
Use random number as a part of order id - Set if you want to use a random string in order id.
Enter number of zeroes to be padded in order id (if required) - Set the number of zeroes to be used in order id generation if needed. Final order id may look like this - JGOID-XYG5F-000123
Where 'JGOID' is order prefix, '-' is separator, 'XYG5F' is random string, '000' are zeroes padded in order id

Email settings

Campaign settings

Paypal mass payment settings

Minimum amount -The amount above which Mass payment should be used. It means, if you set it to 100 USD then your payout amount should be more than 100 USD.
API username - Enter the username for Mass payment.
API password - Enter the password for Mass payment.
API signature - Enter the signature for Mass payment.
Enable sandbox mode - Enable sandbox mode for Mass payment.
API version - API version for Mass Payment.

Refer this link https://www.paypal.com/cgi-bin/webscr?cmd=_batch-payment-overview-outside for more details on Paypal mass payments

JGive: Setup and configuration

Where to find settings?